Advertisement
Visage Lighting & Effects
Important:
Damages caused by the disregard of this user manual are not subject to warranty. Batmink
Distribution will not accept liability for any resulting defect or problem. Please ensure you follow the
health and safety recommendations below when using the PAR 64-Quad 7-4 IN 1 IP65:
Please make sure that there are no obvious transport damage. Should you notice any damage
on the A/C connection cable or on the casing please contact Batmink Distribution
Please handle the power cord with care. Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord
If an extension cord is required, make sure that the core diameter is sufficient for the required
power consumption of the device
Always disconnect from the main power source when the device is not in use or before
cleaning it
Please ensure you keep this device clean and in good condition, please remove the power
source before cleaning takes place. The device must be taken out of operation, disconnected
then be cleaned with a dry cloth.
HEALTH WARNING
Never look directly into the light source as this may cause damage to eyes.
Keep away from children and amateurs.
OPERATING & INSTALLATION CONSIDERATIONS
This product is only allowed to be operated with an alternating voltage of 90V/240V,50/60 Hz.
This device is designed for professional use (e.g. on stage in discotheques, theatres etc.)
If used in conjunction with a smoke machine make sure that the device is never exposed to
the direct smoke jet and is installed in a distance of 0.5 meter between the smoke machine
and device
The minimum distance between light-output and the illumination surface must be more than
0.1 meters.
This device is only allowed for an installation via mounting bracket. In order to safe guard
sufficient ventilation leave 50 cm of free space around the device.
When installing the device, make sure there is no highly flammable material (i.e. decorations)
within a distance of a minimum of 0.5m
IMPORTANT OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE OF INSTALLTION, including
(but not limited to):
calculating working load limit
periodic safety inspections of all installation materials being used with the device
safe install areas out of reach of people if the device is lowered from the ceiling or high points
professional trussing systems must be used at all times with secure clamps
secure installation to ensure the device does not swing freely
www.visage-lighting.co.uk
Advertisement
