Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ViSAGE VIS122
Summary of Contents for ViSAGE VIS122
- Page 1 MINI-BEAMWASH (VIS122) GB - INSTRUCTION MANUAL MINI-BEAMWASH Page 1...
-
Page 2: Safety Introduction
Thank you for having chosen our VISAGE LED EFFECT. For your own safety, please read this user manual carefully before installing the device. SAFETY INTRODUCTION • If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. - Page 3 MOUNTING Orientation This fixture may be mounted in any position, provided there is adequate room for ventilation It is important never to obstruct the fan or vents pathway. When selecting installation location, take into consideration lamp replacement access and routine maintenance. Safety cables must always be used.
-
Page 4: Description Menu
DESCRIPTION MENU To select any functions, press the MENU button until the required function is showing on the display. Select the unction by pressing the ENTER button and the display will blink. Use the DOWN and UP button to change the mode. Once the required mode has been selected, press the ENTER button to setup to go back to the functions without any changes press the MENU button again. -
Page 5: Channel Mode
= GREEN 2 = BLUE 2 = WHITE 2 = DIMMER = STROBE 13 TEST Auto test 14 HOUR Time of use machine .= 0----9999 15 VER software version number = V104 16 RSET Restore factory settings .=YES .=NO DMX 512 ADDRESS To select Addr, press the ENTER button to show the DMX ADDRESS on the display. - Page 6 SHOW MODE To select the Shnd , press the ENTER button to show the SHOW MODE on the display. Use the DOWN/UP button to select speed of the auto mode . Sp 0 (slow speed), Sp 1 (speed 1) or … or S p 9 (high speed). Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any changes press the MENU button again.
- Page 7 PAN INVERSE To select Pan, Press the ENTER button to show the PAN INVERSE on the display. Use the DOWN/UP button to select the Yes (PAN inversion) or No (normal) mode. Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any changes press the MENU button again.
-
Page 8: Master Slave Operating
OPERATING MASTER SLAVE OPERATING By linking the units in master/slave connection, the first unit will control the other units to give an automatic, sound activated, synchronized light show. This function is good when you want an instant show. You have to set the first unit in master mode M a s t and select S p 0 (random show), Sp1 (show 1) or …or S p 9 (show 9). -
Page 9: Dmx Table
DMX TABLE 15 DMX channels Channel DMX Value Function 0—255 0—255 Tilt 0----7 No Function 8—131 Tilt forward rotation(From slow to fast) 132---255 Tilt reverse rotation(From slow to fast) 0—255 Pan / Tilt Motor Speed 0—255 Master Dimmer (0-----100%) 0---255 Strobe Speed 0—255 Red Dimmer (0-----100%) Both Sides... - Page 10 21 DMX channels Channel Value Function 0---255 0---255 Pan Fine 0---255 Tilt 0—255 Tilt Fine 0----7 No Function 8—131 Tilt forward rotation(From slow to fast) 132---255 Tilt reverse rotation(From slow to fast) 0---255 Pan / Tilt Motor Speed 0—255 Master Dimmer (0-----100%) 0---255 Strobe Speed 0---255...
-
Page 11: Technical Specifications
There must not be any deformations on the housing, glass pane, fixations and installation spots. The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending on the installation spot and usage have to be adhered to by a skilled installer and any safety problems have to be removed.
Need help?
Do you have a question about the VIS122 and is the answer not in the manual?
Questions and answers