Introduction; Before Use; Fitting; Cleaning - aidapt Cleo Usage And Maintenance Instructions

INTRODUCTION

Thank you for deciding to purchase the Cleo Bath Seat. The Cleo Bath Seat is manufactured from the
finest materials and components available, when used correctly it is designed to give many years of
reliable trouble-free service.
Please Note: Always consult with the prescriber/Physiotherapist if you are in any doubt that this
product is suitable for your use.
N.B. This equipment must be installed by a competent person.
190 kg (29 stone) weight limit.
Do not exceed the weight limit stated – doing so could put the user at risk.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments as this may
•
damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do not use
•
your product, but contact your supplier for support.

FITTING

1. Ensure bath is dry and free from soap / oil film.
2. Position seat and press firmly into position.
3. Test for stability.

CLEANING

Only use a mild detergent or disinfectant, never use an abrasive cleaner. Always ensure that you wipe
dry all equipment and treat joints with a water dispersing agent, e.g. WD40 after washing.

REISSUE

If you reissue or are about to reissue this product, please thoroughly check all components for their
safety. This includes tightness of all nuts/bolts/castors and other screw in/bolt in/push in components.
If in any doubt, please do not issue or use, but immediately contact your supplier for service
support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.

IMPORTANT INFORMATION

The information given in this instruction booklet must not be taken as forming part of or establishing
any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or
its subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the
user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer
(detailed below) if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Usage and Maintenance Instructions
2
Ver.2 08/2012 (1856)