Usb Operation; Charging From The Usb Port; Repeat Playback - JVC RD-D90 Instruction Manual

USB Operation

By connecting a USB mass storage device (including
USB flash memory, USB flash players) to this unit, you
can enjoy the device's stored music through the unit.
1. Insert the USB device into the USB socket at the
front of unit.
2. Press the MODE button on the unit repeatedly
to select USB source or press USB on the remote
control. The word "USB" will be shown on the
display.
If the USB device hasn't been recognised try
un-plugging it and plugging it in again.
3. Press the PRESET/FOLDER buttons to select a
folder.
4. All other playback features are the same as if
you were playing a CD.
• The player supports the USB music file format of MP3.
• The USB device must be formatted as FAT 32.
• If your USB device is loaded with MP3s but the display keeps showing 'NO MUSIC" on the display, the
format of your USB device might not be compatible with the unit.
• The unit can support USB devices with up to 32GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.

Charging From the USB port

The USB port is designed only for charging mobile devices (e.g. MP3 player, mobile phone,
etc). It supplies 5V DC at a charging current of up to 1A.
Use a USB cable (not included) to connect mobile device to the USB port of the unit and
the mobile device will start charging.

Repeat Playback

• MP3 tracks
Press the REPEATbutton repeatedly to choose a function.
REP ONE:
REP ALBUM: Repeats the album.
REP ALL:
REP OFF:
24
RD-D90_IB.indd 24
REP ONE REP ALBUM
Repeats the currently playing track.
Repeats all tracks on the USB.
Cancels the previously set repeat playing.
MODE MONO/STEREO
STOP
SCAN MENU
AUDIO IN
REP ALL REP OFF
VOLUME TUNING / ENTER
06/06/2016 09:18