Beko RFNE312L33W User Manual page 20

• Large quantities of hot food may
have been recently placed into the
product. >>> Do not place hot food
into the product.
• The doors were opened frequently or
kept open for long periods. >>> The
warm air moving inside will cause the
product to run longer. Do not open
the doors too frequently.
• The freezer or cooler door may be
ajar. >>> Check that the doors are
fully closed.
• The product may be set to
temperature too low. >>> Set the
temperature to a higher degree and
wait for the product to reach the
adjusted temperature.
• The cooler or freezer door washer
may be dirty, worn out, broken or
not properly settled. >>> Clean or
replace the washer. Damaged / torn
door washer will cause the product to
run for longer periods to preserve the
current temperature.
The freezer temperature is very
low, but the cooler temperature is
adequate.
• The freezer compartment
temperature is set to a very low
degree. >>> Set the freezer
compartment temperature to a higher
degree and check again.
The cooler temperature is very
low, but the freezer temperature is
adequate.
• The cooler compartment temperature
is set to a very low degree. >>> Set
the freezer compartment temperature
to a higher degree and check again.
The food items kept in cooler
compartment drawers are frozen.
• The cooler compartment temperature
is set to a very low degree. >>> Set
the freezer compartment temperature
to a higher degree and check again.
The temperature in the cooler or
the freezer is too high.
• The cooler compartment temperature is set
to a very high degree. >>> Temperature
setting of the cooler compartment has an
effect on the temperature in the freezer
compartment. Wait until the temperature
of relevant parts reach the sufficient level
by changing the temperature of cooler or
freezer compartments.
• The doors were opened frequently or kept
open for long periods. >>> Do not open the
doors too frequently.
• The door may be ajar. >>> Fully close the
door.
• The product may have been recently
plugged in or a new food item is placed
inside. >>> This is normal. The product will
take longer to reach the set temperature
when recently plugged in or a new food item
is placed inside.
• Large quantities of hot food may have been
recently placed into the product. >>> Do
not place hot food into the product.
Shaking or noise.
• The ground is not level or durable. >>> If
the product is shaking when moved slowly,
adjust the stands to balance the product.
Also make sure the ground is sufficiently
durable to bear the product.
• Any items placed on the product may cause
noise. >>> Remove any items placed on the
product.
The product is making noise of
liquid flowing, spraying etc.
• The product's operating principles involve
liquid and gas flows. >>> This is normal
and not a malfunction.
19
EN