Table of Contents
Advertisement
Diagnostic Code
Definition
No memory
G
Y
Y
Y
modules are
detected.
A
B
C
D
A PCI bus failure
Y
G
Y
Y
has occurred.
A
B
C
D
Other failure has
G
G
G
Y
occurred.
A
B
C
D
Corrective Action
• Reinstall all memory modules (see
page 82) and restart the computer.
• To eliminate the possibility of a faulty
memory connector, remove all memory
modules, install one memory module
(see page 82), and then restart the
computer. If the computer starts
normally, move the memory module to
a different connector and restart the
computer. Continue until you have
identified a faulty connector or
reinstalled all modules without error.
• If the problem persists, contact Dell
(see page 95).
Determine if a conflict exists by
1
removing a card and then restarting the
computer.
If the problem persists, reinstall the card
2
that you removed, remove a different
card (see page 80), and then restart the
computer.
Repeat this process for each card. If the
3
computer starts normally, troubleshoot
the last card removed from the
computer for resource conflicts (see
"Resolving Software and Hardware
Incompatibilities" on page 64).
If the problem persists, contact Dell
4
(see page 95).
• Ensure that the cables are properly
connected from the hard drive, CD
drive, and DVD drive to the system
board (see page 77).
• If the problem persists, contact Dell
(see page 95).
Advanced Troubleshooting
59
Advertisement
Table of Contents
