Delfield Shelleysteel SCS-30 Specifications

Short Form Specifications
Exterior body is constructed of 18-gauge stainless steel side panels and
14-gauge galvanized bottom. All exterior side panels are reinforced with
overlapping corners and are welded in place. All body cutouts are reinforced with
14-gauge galvanized channel supports.
Interior Lining at the cashier's end is 18-gauge stainless steel, with a stainless
steel bottom shelf. Unit has an 16.5" x 16.5" x 5" (42cm x 42cm x 12.7cm)
stainless steel cash drawer with lock and key.
Exterior top is constructed of 14-gauge stainless steel, welded, ground and
polished into one integral unit. Top is fabricated with square exterior corners. A
2" (5.1cm) ferruled hole is located at the rear of the top to allow cord access
for cash registers.
Casters; unit is mounted on 5" (12.7cm) diameter swivel casters with non-
marking polyolefin tires and plate brakes. Overall height of caster assembly is
6" (15.2cm).
Optional Accessories and Modifications
A) 12" (30.5cm) wide stainless steel fold-down tray slide
C) 10" (25.4cm) wide three-bar fold-down tray slide
D) 10" (25.4cm) wide composite fold-down cutting boards
E) 10" (25.4cm) wide stainless steel fold-down work shelf
F) Line-up interlock device
Q) *120V/60Hz/1ø, 10 amp convenience outlet with breaker
ST) Stainless steel trim strips
U) 14" x 30" (35.6cm x 76.2cm) stainless steel end drop shelf
V) 6" (15.2cm) high adjustable stainless steel legs in lieu of casters
X) Laminate exterior panels in lieu of stainless steel exterior panels
*Inclusion of these options will alter the electrical specifications of unit.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2003 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY
APPROVAL
Mobile Cashier's Counter
Model SCS-30
shown with options A, and Q
DATE
SCS