Delfield SAHRI1-G Specifications

Specification Line
Self-Contained Glass Door Heated Roll-In
MODELS
❑ SSHRI1-G 1 section stainless interior
full door
❑ SAHRI1-G 1 section aluminum interior
full door
SSHRL1-G
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to refrigeration system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor. Interior light mounted to the interior ceiling is
controlled automatically through a switch mounted in
the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless
steel breaker strips. An air duct is mounted to the
ceiling assuring low velocity, even air movement
throughout the cabinet interior.
❑ SSHRI2-G
2 section stainless interior
full door
❑ SAHRI2-G 2 section aluminum interior
full door
STANDARD FEATURES
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Built in door locks with heavy duty strikes
• Exterior digital thermometer
• Easy access "flip up" shroud
• Stainless steel breaker strips
• Inclined stainless steel exterior ramp
• Flourescent light
• Two year parts & labor warranty
Glass Doors: Double paned tempered thermopane glass.
Constructed with a combination of extruded aluminum
and PVC. Each door has two edgemount, self-closing, cam
lift style hinges. Doors can be removed from the cabinet
without the use of tools. Door handle is continuous along
vertical dimension of the door. Door gaskets are magnetic
and mount to the door, snapping in place and removable
with out tools. Keyed door lock is mounted to the door.
Lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Heating System: Cabinets are designed to maintain
temperatures between 120˚F and 200˚F. Heating elements
are helical shaped, with tubular fins. High speed blower
provides uniform airflow in the cabinet. Entire heating
system is mounted to the exterior of the cabinet ceiling,
outside the food zone. It is assembled as one piece and can
be removed as one piece. Temperature is controlled by an
980 S. Isabella Road Phone: 800-733-8948
Mt. Pleasant, MI 48858 Fax: 800-669-0619
www.delfield.com Email: info@delfield.com
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
❑ SSHRI3-G
3 section stainless interior
full door
❑ SAHRI3-G 3 section aluminum interior
full door
OPTIONS AND ACCESSORIES
❑ Security package
❑ Stainless steel back
❑ Laminate on front, sides and back
❑ Heat shield end
❑ Stainless steel kick plate
❑ Full height shelf kit
❑ Half height shelf kit
❑ Flat exterior ramp
❑ 220-50-1 electrical
❑ 220-60-1 electrical
adjustable electronic thermostat. System on/off switch is
located on the front exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 volt,
60Hz, single phase. Connection must be hard wired to
junction box on exterior top of the cabinet.
Approval _________________
Date____________________