Control Panel - Electrolux LUS1AF28W User Manual

4. CONTROL PANEL

1
Alarm light
1
Power indicator light
2
FastFreeze indicator
3
FastFreeze / Alarm reset button
4
Temperature regulator
5
4.1 Switching on
1. Insert the plug into the wall socket.
2. Turn the temperature regulator
clockwise to a medium setting.
Power indicator and alarm lights will
illuminate.
4.2 Switching off
To turn off the appliance, turn the
temperature regulator to
The power indicator light
remains switched on until
the appliance is
disconnected from the power
socket.
4.3 Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance
yourself.
2
1
3
4
2 3 4
position.
3.5 Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
Choose the setting keeping in mind that
5
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
4.4 FastFreeze function
The FastFreeze function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time,
protects food products already stored in
the freezer compartment from
undesirable warming.
1. Activate the FastFreeze function by
pressing the FastFreeze.
The FastFreeze indicator switches on.
CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
To freeze fresh food activate
the FastFreeze function at
least 24 hours before placing
the food to complete pre-
freezing.
This function stops
automatically after 52 hours.
ENGLISH 9