Barreto 1824TK Operator's Manual

Hydraulic track trencher

Advertisement

Quick Links

THE
MODEL 1824TK - 2324TK
HYDRAULIC TRACK TRENCHER
OPERATOR'S MANUAL
TRENCHER INTENDED USE
This machine is designed for digging trenches in "normal" ground of reasonably soft dirt and stones
up to 6" (15cm) in diameter. Ground with larger stones, high clay content, very hard packed, very
dry, or in a frozen condition may be unsuitable for normal trenching. Consider using a backhoe or
other heavier equipment for such conditions.

TABLE OF CONTENTS

LUBRICATION REQUIREMENTS ..................................................................................................... 2
SAFETY MESSAGES ........................................................................................................................... 3
SAFETY INSTRUCTIONS OVERVIEW ............................................................................................. 4
BATTERY & ELECTRIC STARTER SAFETY INSTRUCTIONS ..................................................... 6
TRENCHER OPERATING INSTRUCTIONS ..................................................................................... 7
CONTROLS ........................................................................................................................................... 7
ENGINE CONTROLS ........................................................................................................................... 8
ENGINE START UP PROCEDURE ..................................................................................................... 9
GETTING STARTED ............................................................................................................................ 9
TRENCHING PROCEDURE .............................................................................................................. 10
TRENCHING TIPS .............................................................................................................................. 10
SHUT DOWN PROCEDURE ............................................................................................................. 10
JUMP STARTING ENGINE WITH ELECTRIC STARTER ............................................................. 11
GROUND TRANSPORT OF THE TRENCHER ................................................................................ 12
EMERGENCY TOWING .................................................................................................................... 13
ROAD TRANSPORT OF THE TRENCHER ..................................................................................... 14
OPERATOR PREPARATION ............................................................................................................ 16
DETERMINE LOCATION OF UNDERGROUND UTILITIES ........................................................ 17
WORK SITE ASSESSMENT .............................................................................................................. 18
CONTACT WITH UNDERGROUND UTILITIES ............................................................................ 19
INDEX .................................................................................................................................................. 20
1824TK - 2324TK OPERATOR'S MANUAL
1/24/12
Page 1 of 20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1824TK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Barreto 1824TK

  • Page 1: Table Of Contents

    ROAD TRANSPORT OF THE TRENCHER ..................14 OPERATOR PREPARATION ......................16 DETERMINE LOCATION OF UNDERGROUND UTILITIES ............17 WORK SITE ASSESSMENT ......................18 CONTACT WITH UNDERGROUND UTILITIES ................19 INDEX ..............................20 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 1 of 20...
  • Page 2: Lubrication Requirements

    LUBRICATION REQUIREMENTS Grease at the intervals indicated per the illustration of grease lubrication points. There is also a grease diagram decal on the machine. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 2 of 20...
  • Page 3: Safety Messages

    Safety decals with a signal word "DANGER", "WARNING", or "CAUTION" are affixed to the trencher near specific hazards. Read this manual and study ALL decals on the trencher before operating the trencher. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 3 of 20...
  • Page 4: Safety Instructions Overview

    Serious injury or death will result by operator contact with the moving chain. The digging chain can suddenly drag the machine forward if the trencher is forced too quickly into the ground or catches on a buried object. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 4 of 20...
  • Page 5 WARNING: Muffler and engine get hot enough to cause serious burns. For the safety of yourself and others, allow enough time for the engine, muffler, and the hydraulic fluid to cool completely before performing any cleaning or maintenance. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 5 of 20...
  • Page 6: Battery & Electric Starter Safety Instructions

    WARNING: If trencher should fall it would crush anybody under it. We recommend having a fire extinguisher suitable for petrol fires in the operating area. Attachments can change the center of mass and machine operations. Use only Barreto attachments. BATTERY & ELECTRIC STARTER SAFETY INSTRUCTIONS Shield entire face, especially your eyes, and wear rubber gloves to avoid acid burns whenever doing anything with the battery.
  • Page 7: Trencher Operating Instructions

    During normal operation you will hear the relief valve working. 8. PARKING BRAKE: It is located behind the left hand track motor. Move the handle down to engage the brake, and up to disengage it. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 7 of 20...
  • Page 8: Engine Controls

    Refer to the ENGINE START UP PROCEDURE. ENGINE: This is the throttle lever . It controls the engine speed. Operate trencher at full (Kohler only) throttle (all the way forward). 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 8 of 20...
  • Page 9: Engine Start Up Procedure

    Reduce the engine speed if the hydraulic pump whines. Pump noise may indicate a lack of hydraulic fluid flow that could damage the pump. For frequent starts below 18°F consult your Barreto Manufacturing, Inc. dealer. GETTING STARTED 1. Start and warm up engine.
  • Page 10: Trenching Procedure

    7. Close the FUEL SHUTOFF VALVE. Shut off engine and allow it to cool before refueling. WARNING: Fuel fumes can catch fire or explode. Do not smoke or allow flames or sparks in the area. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 10 of 20...
  • Page 11: Jump Starting Engine With Electric Starter

    4. Disconnect the cables in reverse order of connection and cover each jumper cable terminal. To avoid sparks near the battery, never disconnect the red jumper cable without first disconnecting the black jumper cable. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 11 of 20...
  • Page 12: Ground Transport Of The Trencher

    Navigation on inclines should be especially slow and turns very gradual. A 20° maximum incline is allowed. Honda engines have an Oil Alert system that will automatically stop the engine if tipped more than 20°. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 12 of 20...
  • Page 13: Emergency Towing

    3. Secure the boom in the up position with a strap from the boom end to the handlebars. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 13 of 20...
  • Page 14: Road Transport Of The Trencher

    ROAD TRANSPORT OF THE TRENCHER The BEST way to transport the trencher over roads is with the BARRETO E4X6 TILT BED TRAILER and the optional 00340 TIE-DOWN KIT. Refer to the following checklist before towing: • Towing vehicle should have a 2" (5cm) ball. Be sure it is in good repair and securely fastened to the vehicle.
  • Page 15 WARNING: If trencher should fall it would crush anybody under it. 4. Chain or strap the trencher to the truck using the two chain loops at the rear of the trencher lower body and D-ring on front of trencher. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 15 of 20...
  • Page 16: Operator Preparation

    It is important to select a device that is adequate and appropriate for your specific work environment since the peak noise level varies. A local environmental noise specialist may help you to determine the level of hearing protection required. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 16 of 20...
  • Page 17: Determine Location Of Underground Utilities

    For areas not represented by One-Call Systems International, contact the appropriate utility companies to locate and mark the underground installations. Do not rely on visual evidence of underground utilities such as manhole covers or electrical drop boxes…CALL! 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 17 of 20...
  • Page 18: Work Site Assessment

    DRIVE or DIG CHAIN is engaged, these functions should stop. This is intended for your safety and must be maintained in good functional condition. Contact your dealer if anything on the trencher does not function properly. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 18 of 20...
  • Page 19: Contact With Underground Utilities

    Fiber optic cables: If you think that you may have severed a fiber optic cable, do not touch or even look at the ends of it. WARNING: Fiber optic cables convey laser light that can injure your eyesight. Call 911 for help. 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 19 of 20...
  • Page 20: Index

    UNDERGROUND UTILITIES, 17, 18, 19 LUBRICATION, 2 UNLOADING, 14, 15 Navigating, 5, 12, 13, 14, 15 WHEEL CONTROLS, 10, 14, 15 OPERATING INSTRUCTIONS, 7, 16 WORK SITE, 18, 19 OPERATOR PREPARATION, 16 1824TK - 2324TK OPERATOR’S MANUAL 1/24/12 Page 20 of 20...

This manual is also suitable for:

2324tk

Table of Contents