Delfield SAW1-G Specifications

Specification Line
Self-Contained Glass Door Wine Cabinet Reach-In
MODELS
❑ SSW1-G
1 section stainless interior
full door
❑ SSW1-GH
1 section stainless interior
half door
❑ SAW1-G 1 section aluminum interior
full door
❑ SAW1-GH 1 section aluminum interior
half door
SSW2-G
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to refrigeration system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor. Four chrome plated wine shelves are provided
per section. Shelves rest on clips which are adjustable
in 1" increments on stainless steel pilasters affixed
to the cabinet interior. Each section can hold up
to 8 wine shelves. Each wine shelf holds 10 to 12
bottles. Pilasters are removable without tools for
cleaning. Interior light mounted to the interior ceiling
is controlled automatically through a switch mounted
in the hinge assembly to protect against breakage.
❑ SSW2-G 2 section stainless interior
full door
❑ SSW2-GH
2 section stainless interior
half door
❑ SAW2-G
2 section aluminum interior
full door
❑ SAW2-GH 2 section aluminum interior
half door
STANDARD FEATURES
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Built in door locks with heavy duty strikes
• Exterior digital thermometer
• Easy to use electronic control
• Easy access "flip up" shroud
• Three chrome plated wine shelves per section
• 10' attached cord and plug standard on 115V units
• 6" adjustable stainless steel legs
• Stainless steel breaker strips
• Energy savings door heater switch
• 50˚F to 60˚F temperature range
• Two year parts & labor warranty
Door openings are protected with heavy gauge stainless
steel breaker strips. An air duct is mounted to the ceiling
assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Double paned tempered thermopane glass.
Constructed with a combination of extruded aluminum
and PVC. Each door has two edgemount, self-closing, cam
lift style hinges. Doors can be removed from the cabinet
without the use of tools. Door handle is continuous along
vertical dimension of the door. Door gaskets are magnetic
and mount to the door, snapping in place and removable
with out tools. Keyed door lock is mounted to the door.
Lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Refrigeration system: All components are mounted
to the exterior cabinet ceiling, outside the food zone and
are assembled as one piece and can be removed as one
980 S. Isabella Road Phone: 800-733-8948
Mt. Pleasant, MI 48858 Fax: 800-669-0619
www.delfield.com Email: info@delfield.com
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
❑ SSW3-G 3 section stainless interior
full door
❑ SSW3-GH
3 section stainless interior
half door
❑ SAW3-G
3 section aluminum interior
full door
❑ SAW3-GH 3 section aluminum interior
half door
OPTIONS AND ACCESSORIES
❑ Additional shelves
❑ Tray slides
❑ Stainless steel back
❑ Laminate on shroud, sides and back
❑ Bottom mount electrical
❑ Stainless steel banking strip
❑ Heat shield end
❑ Stainless steel kick plate
❑ Laminate kick plate
❑ 4" stainless steel utility base
❑ Alarm control display
❑ 220-50-1 electrical
❑ 220-60-1 electrical
piece. Environmentally friendly R404A refrigerant is
used. System has the capability of maintaining between
50˚F and 60˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive
thermostatic expansion valve. System is controlled using
Delfield's ACT-Advanced Control Technology electronic
temperature control, which provides improved pull
down times, reducing compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V,
60Hz, single phase. A 10' cord and plug is supplied
attached to a junction box mounted on the exterior top
of the cabinet.
Approval _________________
Date____________________