Troubleshooting; Warranty - Garden Treasures MZ14027GA Assembly Instructions Manual

TROUBLESHOOTING

PROBLEM
1. Pump is not covered with
water.
2. Pump or fountain is blocked. 2. Disconnect fountain from power source,
Fountain is
3. Pump is not secured
not
correctly.
pumping
water.
4. Pump is not electrically
connected.
5. Pump may be "air locked."

WARRANTY

 If this product fails due to a defect in materials or workmanship at any time during the first one year
of ownership, the manufacturer will replace it free of charge, postage-paid at their option. This
warranty does not cover products which have been abused, altered, damaged, misused, cut or
worn. This warranty does not cover use in commercial applications. The manufacturer DISCLAIMS
all other implied or express warranties including all warranties of merchantability and/or fitness for
a particular purpose. As some states do not allow exclusions or limitations on an implied warranty,
the above exclusions and limitations may not apply. This warranty gives you specific legal rights,
and you may have other rights that vary from state to state.
 This warranty is limited to the replacement of defective parts only. Labor charges and/or damage
incurred during installation, repair and replacement as well as incidental and consequential
damages connected with the above are excluded. Any damage to this product as a result of
neglect, misuse, accident, improper installation or use other than the purpose SHALL VOID THIS
WARRANTY.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 8 p.m.,
EST, Monday - Friday.
PART DESCRIPTION
G Pump Pipe
H Rubber gasket
I Thread
J Pump
K Small light ring
L Big light ring
POSSIBLE CAUSE
PART #
MZ14027GA-1
MZ14027GA-2
MZ14027GA-3
MZ14027GA-4
MZ14027GA-5
MZ14027GA-6
CORRECTIVE ACTION
1. Add more water to the reservoir.
remove any obstruction, and clean bowl and
tubing.
3. Disconnect fountain from power source, pour
out any remaining water, and ensure the
tubing in the reservoir is tightly secured to
the pump outlet.
4. Check to make sure pump is plugged in and
the outlet is working.
5. Plug and unplug the pump several times to
clear any air that may have been trapped.
6
Printed in China