Cleaning And Maintenance - ohmex HET 2020 Instruction Manual

HET 2020

CLEANING AND MAINTENANCE

Before performing cleaning operations,
ALWAYS disconnect the plug from the mains
power and wait for the appliance to be
completely cooled.
- Use a delicate detergent for the general cleaning.
- Clean the ventilation holes with a cloth or with a feather duster.
- Never use abrasive detergents or materials or "aggressive" cleansers.
NEVER immerse the appliance in water or in other liquids.
INCONVENIENCES AND POSSIBLE SOLUTIONS
Problem
The appliance doesn't turn on or the
fans do not work.
The flame effect doesn't turn on
Possible solution
Check the wall socket, if necessary by con-
necting another appliance.
The appliance overheated (cut-off
protection).
Wait at least 15 minutes, then try to turn it
back on.
Defective Led light.
Have the appliance checked by a qualified
electrician.
EN
53