Table of Contents
Advertisement
Available languages
Available languages
EN
- Power supply: ................................. 220-240V~ 50Hz
- Power: ................................................ 2000W
- Moving flame effect
- Automatic shut-off in case of overheating
- Dual heat setting 1000W + 1000W
- Adjustable thermostat
- Dimensions (wxdxh): 445 x 321 x 740 mm
The heater is designed to be free standing on a hard level surface. When positioning,
please bear the following points in mind:
• If you are placing the heater in an alcove, make sure that 150mm side clearance is
maintained to ensure good air circulation
• The heater must not be located over a fixed electrical socket.
• The socket must always be accessible in order to disconnect the heater from the
electrical supply.
• Keep hearth rugs and other soft furnishings, etc., away from the front of the heater. They
could obstruct the free flow of hot air from the fan and damage both soft furnishings
and heater.
150 mm
50
TECHNICAL DATA
PLACEMENT
HET 2020
controls
150 mm
Advertisement
Table of Contents
