Lenovo ThinkVision T24i-20 User Manual page 13

8. Connect the speaker's audio cable and audio jack of monitor to transfer audio source from
Display Port, HDMI or USB.
Note: The audio output in Display Port or HDMI modes.
9. Insert the power cord into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm
Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used.
2
) shall be used.
1-9
Chapter 1.