1.3
Risk of Explosion
Do not store explosive substances such as aerosol cans in
the device
1.4
Risk of Fire
•
When setting up the device, ensure that the connecting
cable is not pinched or damaged
•
Keep the ventilation openings clear on all sides, ensure that
there is sufficient ventilation for installation constructions
•
Do not use mechanical devices or other aids to accelerate
the defrosting process
•
Do not damage the cooling circuit
x = 50 mm
X = 2 inch
x
x
x
x
1.5
Risk of Health
•
First check whether the cooling capacity is sufficient for
your application and whether it meets the requirements for
cooling your food or drugs
•
Foodstuffs may only be stored in the device in their original
packaging or suitable containers
•
If the lid of the device is left open for a long period of time
there may be a strong temperature increase in the cooling
compartments
•
If you do not use the device for a longer period of time,
please switch it off. Defrost the device completely. Clean and
dry all surfaces thoroughly (see chapter 4)
24
WARNING
CAUTION
•
Leave the lid open (at least in the ventilation position) to
prevent mold growth.
•
Clean the surfaces that may come into contact with food
regularly
ATTENTION
1.6
Risk of Damage
•
Only transport the device in an upright position
•
Compare the existing power supply with the voltage specifi-
cation on the nameplate
•
Do not use any electrical appliances inside the mobile fridge
unless it is recommended by the manufacturer
•
The device may not be exposed to rain
•
At the end of its service life, this device must be disposed
correctly (see chapter 7)
EN
25