1. Manuals
  2. Brands
  3. Bethlehem Lights Manuals
  4. Artificial Pine Trees
  5. 6.5’ Balsam Fir IPT Ready Shape Tree
  6. Instructions

Bethlehem Lights 6.5’ Balsam Fir IPT Ready Shape Tree Instructions

Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual

Included Parts:

Pre-lighted Tree Top (section A)
Middle Section of Pre-lighted Tree (section B)
Bottom Section of Pre-lighted Tree (section C)
Collapsible Stand with 3 triangular screws attached in a plastic bag.
Caution – Do not overload: Connect a maximum of three series or series parallel connected lighting strings or
decorative outfits to each load fitting. Do not interconnect different types of products. DO NOT PLUG ITEMS INTO
THE OPEN STRAND SOCKETS. NO OTHER PRODUCTS SHOULD BE PLUGGED INTO THE TREE.

Setup Instructions:

Step 1: Position and Set-Up Tree Stand

A. Place tree stand in desired location.
B. Unfold tree stand until the legs are perpendicular and the screw holes are aligned.
C. Insert the tree screws into the screw holds and turn 3 – 4 rotations only (if the screws are inserted too far you
will not be able to fully insert the tree pole).
D. Plug the tree stand into an extension cord or wall outlet. If your tree has a foot pedal: To turn on the power
to the tree tap the foot switch once. Once you have the bottom section in the lights will come on. To shut off
the lights tap it again.
Made in China
6.5' Balsam Fir IPT Ready Shape Tree Instructions
Indoor Use Only
1
H196925INST062012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6.5’ Balsam Fir IPT Ready Shape Tree and is the answer not in the manual?

Questions and answers

Related Manuals for Bethlehem Lights 6.5’ Balsam Fir IPT Ready Shape Tree

Summary of Contents for Bethlehem Lights 6.5’ Balsam Fir IPT Ready Shape Tree

  • Page 1 6.5’ Balsam Fir IPT Ready Shape Tree Instructions Included Parts: Pre-lighted Tree Top (section A) Middle Section of Pre-lighted Tree (section B) Bottom Section of Pre-lighted Tree (section C) Collapsible Stand with 3 triangular screws attached in a plastic bag. Caution –...
  • Page 2 Step 2: Insert the Bottom Section into the Tree Stand A. Remove plastic cap at the end of the metal pole. B. Locate the notch in the tree stand (use arrow stickers as a guide). C. Locate the open groove in the bottom section (the bottom section is marked with “C”). Use arrow stickers as a guide.
  • Page 3 D. Adjust the branch tips for desired appearance (some people chose to perform this step when the tree is fully assembled) Step 4: Shape the Tree Top and Insert into the Middle Section A. Adjust the tips and shape the treetop before inserting into the middle section. B.
  • Page 4 A safety strap has been placed around the plugs to ensure that the plugs do not fall out of the pole during shipping. This strap easily slides over the plugs to hold them tight. If item still fails to light after checking all plugs are plugged in, look for a damaged, missing, or burnt-out bulb. Replace the bulb with included replacement bulbs.

Table of Contents