1. Manuals
  2. Brands
  3. Bethlehem Lights Manuals
  4. Artificial Pine Trees
  5. H203535
  6. Instructions

Bethlehem Lights H203535 Instructions

5’ ipt ready shape tree
Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual

Included Parts:

•
Pre-lighted Tree Top (section B)
•
Bottom Section of Pre-lighted Tree (section A)
•
Collapsible Stand with 3 triangular screws attached in a plastic bag
•
Replaceable bulbs and fuses
•
Tool to replace bulbs
Caution – Do not overload: Connect a maximum of three series or series parallel connected lighting strings or
decorative outfits to each load fitting. Do not interconnect different types of products. DO NOT PLUG ITEMS INTO
THE OPEN STRAND SOCKETS. NO OTHER PRODUCTS SHOULD BE PLUGGED INTO THE TREE.
NOTE: if your tree includes flocking, it is recommended to adjust your tree with a sheet under it to help contain the
flocking that comes loose. If your tree includes decorative embellishments, please note that some movement is
incurred during shipping but the beauty of the tree will not be diminished.

Setup Instructions:

NOTE: Because our trees use high grade materials to ensure a long lifetime of beauty, wearing long sleeves and
gloves is recommended to protect your arms and hands from branches.

Step 1: Position and Set-Up Tree Stand

A. Place tree stand in desired location.
B. Unfold tree stand until the legs are perpendicular and the screw holes are aligned.
C. Insert the tree screws into the screw holds and turn 3 – 4 rotations only (if the screws are inserted too far you
will not be able to fully insert the tree pole).
D. Plug the tree stand into an extension cord or wall outlet. If your tree has a foot pedal: To turn on the power
to the tree tap the foot switch once. Once you have the bottom section in the lights will come on. To shut off
the lights tap it again.
Made in China
5' IPT Ready Shape Tree Instructions
Indoor Use Only
1
H203535INST042014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H203535 and is the answer not in the manual?

Questions and answers

Related Manuals for Bethlehem Lights H203535

Summary of Contents for Bethlehem Lights H203535

  • Page 1 5’ IPT Ready Shape Tree Instructions Included Parts: • Pre-lighted Tree Top (section B) • Bottom Section of Pre-lighted Tree (section A) • Collapsible Stand with 3 triangular screws attached in a plastic bag • Replaceable bulbs and fuses • Tool to replace bulbs Caution –...
  • Page 2 Step 2: Insert the Bottom Section into the Tree Stand A. Remove plastic cap at the end of the metal pole. B. Locate the notch in the tree stand (use arrow stickers as a guide). C. Locate the open groove in the bottom section (the bottom section is marked with “A”). Use arrow stickers as a guide.
  • Page 3 Step 2: Shape the Tree Top and Insert into the Bottom Section A. Adjust the tips and shape the treetop before inserting into the bottom section. B. Locate the notch, groove, and arrows as described above. C. Insert treetop into bottom section (tree top is marked with “B”). Line up the arrows as described above. The lights will turn on once it drops into the correct placement.
  • Page 4 Unplug power supply cord when replacing bulbs and fuses. • NEVER change fuse with the power supply cord plug in wall duplex. • Replace with GKI/Bethlehem lights only. • Avoid touching electric carrying parts with sharp or heavy objects. •...

Table of Contents

Save PDF