Table of Contents
Advertisement
en Troubleshooting
Fault
Appliance stops during the
programme or cuts out.
Mechanical damage
Fault
Appliance door cannot be
closed.
Lid on the detergent dis-
penser cannot be closed.
Noise
Fault
Filling valves making knock-
ing noises.
Knocking or rattling noise.
58
Cause
Cause
Door lock has been activ-
ated.
Door cannot be closed due
to installation method.
Automatic door opening is
not in home position.
Detergent dispenser or lid
are blocked by sticky deter-
gent residue.
Cause
Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.
Spray arm is striking table-
ware.
With a small load the water
jets directly strike against
the tub.
Light items of tableware
move about during the wash
cycle.
troubleshooting
Arrange the tableware so that no
▶
parts project beyond the basket
and prevent the appliance door
from closing properly.
troubleshooting
Close the appliance door with
▶
greater force.
Check whether the appliance has
▶
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.
Wait for a second after opening the
▶
appliance door.
Remove detergent residue.
▶
troubleshooting
Can only be remedied in the do-
▶
mestic installation.
Arrange tableware so that the spray
▶
arms do not strike tableware.
Distribute the tableware evenly.
▶
Load the appliance with more table-
▶
ware.
Position light items of tableware se-
▶
curely.
Advertisement
Table of Contents
