HARVER CN75L-4kw Instruction Manual

Split magnetic induction water heater

Advertisement

SPLIT MAGNETIC INDUCTION
WATER HEATER
BY
HARVER
INSTRUCTION MANUAL
CN75L-4kw

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CN75L-4kw and is the answer not in the manual?

Questions and answers

Summary of Contents for HARVER CN75L-4kw

  • Page 1 SPLIT MAGNETIC INDUCTION WATER HEATER HARVER INSTRUCTION MANUAL CN75L-4kw...
  • Page 2 Thank you for purchasing and using our product. Please read this instruction manual carefully before using the unit and keep this manual for future reference CONTENTS PRODUCT INFORMATION-----------------------------PAGE 2 SAFETY PRECAUTIONS --------------------------------PAGE 3 INSTALLATION PRECAUTIONS----------------------PAGE 4 TROUBLE SHOOTING CODES-------------------------PAGE 5 TECHNICAL SPECIFICATIONS-------------------------PAGE 5 HEATING TIMES-----------------------------------------PAGE 5 INSTALLATION INSTRUCTIONS----------------------PAGE 6/7...
  • Page 3 PRODUCT INFORMATION This product has been developed from Western Harver Technology and also using new temperature sensing technology. These units are tested to CE specification and all local SANS & NRCS requirements have been installed and passed. The unit is split into two parts, the storage tank and the generator unit.
  • Page 4 SAFETY PRECAUTIONS Please ensure the amp rating of the socket is rated above that of the unit. To avoid damage and chance of electric shock, please do not wet the generator unit. Do not put any metal object into the exhaust duct of the generator unit to avoid electric shock.
  • Page 5 INSTALLATION PRECAUTIONS DO NOT ATTEMPT TO INSTALL THE UNIT AS PER THE PICTURES BELOW THE UNT WILL NOT OPERATE CORRECTLY AND WILL CAUSE A DRY BURN ERROR THE WARRANTY WILL BE NULL AND VOID Page 4...
  • Page 6 TROUBLE SHOOTING CODES. No power output. Input voltage low (less than 90 volts a/c) Input voltage high (above 270 volts a/c) Water temperature too high No water in heater (dry burn) Unable to read temperature output TECHNICAL SPECIFICATIONS Unit 75 Litre Power supply 230V 50Hz 3500W...
  • Page 7 INSTALLATION DIAGRAM CN75L DRILL TWO HOLES INTO WALL FIT SUPPLIED RAWL HOOKS HANG MAIN UNIT FIT GENERATOR UNIT ON FIT GENERATOR UNIT ON ON HOOKS LEFT SIDE OF UNIT. RIGHT SIDE OF UNIT. NOTE: UNIT IS WALL PLUG INTO WALL SOCKET PLUG INTO WALL SOCKET MOUNTED CONTROLS WILL FACE TO...

Table of Contents