Related Manuals for HARVER CN50LH-2kw + 2kw
Summary of Contents for HARVER CN50LH-2kw + 2kw
- Page 1 SPLIT MAGNETIC INDUCTION WATER HEATER HARVER INSTRUCTION MANUAL CN50LH-2kw + 2kw CN75LH-2kw + 2kw...
-
Page 2: Table Of Contents
Thank you for purchasing and using our product. Please read this instruction manual carefully before using the unit and keep this manual for future reference CONTENTS PRODUCT INFORMATION-----------------------------PAGE 2 SAFETY PRECAUTIONS---------------------------------PAGE 3 INSTALLATION PRECAUTIONS----------------------PAGE 4 TROUBLE SHOOTING CODES-------------------------PAGE 5 TECHNICAL SPECIFICATIONS-------------------------PAGE 5 HEATING TIMES-----------------------------------------PAGE 5 INSTALLATION INSTRUCTIONS----------------------PAGE 6/7 Page1... -
Page 3: Product Information
PRODUCT INFORMATION This product has been developed from Western Harver Technology and also using new temperature sensing technology. These units are tested to CE specification and l local SANS & NRCS requirements have been installed and passed. The unit is split into two parts, the storage tank and the generator unit. -
Page 4: Safety Precautions
SAFETY PRECAUTIONS Please ensure the amp rating of the socket is rated above that of the unit. To avoid damage and chance of electric shock, please do not wet the generator unit. Do not put any metal object into the exhaust duct of the generator unit to avoid electric shock. -
Page 5: Installation Precautions
DO NOT ATTEMPT TO INSTALL THE UNIT AS PER THE PICTURES BELOW THE UNT WILL NOT OPERATE CORRECTLY AND WILL CAUSE A DRY BURN ERROR THE WARRANTY WILL BE NULL AND VOID Page 4... -
Page 6: Trouble Shooting Codes
TROUBLE SHOOTING CODES. No power output. Input voltage low (less than 90 volts a/c) Input voltage high (above 270 volts a/c) Electronics temperature too high No water in heater (dry burn) Unable to read temperature output TECHNICAL SPECIFICATIONS Unit 50 Litre 75 Litre Power supply 230V 50Hz... -
Page 7: Installation Instructions
INSTALLATION DIAGRAM CN50L DRILL TWO HOLES INTO WALL FIT SUPPLIED RAWL HOOKS HANG MAIN UNIT ON HOOKS FIT GENERATOR UNIT ON NOTE: UNIT IS A HORIZONTAL FIT GENERATOR UNIT ON LEFT SIDE OF UNIT. WALL MOUNTED RIGHT SIDE OF UNIT. PLUG INTO WALL SOCKET PLUMB UNIT INTO WATER PLUG INTO WALL SOCKET...
Need help?
Do you have a question about the CN50LH-2kw + 2kw and is the answer not in the manual?
Questions and answers