GE CPLGSTDBLW1 Install Manual page 2

How to Set Up and Enable Voice
and Out of Home Control for
Your Smart Plug and Bulbs
Install
FCC Compliance Statement Compliance Notice:
your Smart Plug.
This equipment has been tested and found to comply with the limits for a
If pairing with
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
Smart Bulbs,
are designed to provide reasonable protection against harmful interfer-
install those in the
ence in a residential installation. This equipment generates, uses and can
same room as
radiate radio frequency energy and, if not installed and used in accor-
the Smart Plug.
dance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Now you can control your lights with your voice and away from home.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Download
the
C by GE app.
Voila!
Add
your Smart Plug
to the C by GE app.
Then, add Smart Bulbs
to the C by GE app in
the same room.
Follow the instructions
in the app to set up
your voice assistant.