Table of Contents
Advertisement
Remote Controller Installation
Although the room temperature sensor is in the indoor unit, the remote controller should be
installed in such places away from direct sunlight and high humidity.
Installation of the remote controller
- Select places that are not splashed with water.
- Select control position after receiving customer approval.
- The room temperature sensor is built in the indoor unit.
- This remote controller equipped with liquid crystal display. If this position is higher or lower, dis-
play is difficult to see.(The standard height is 1.2 ~ 1.5m high)
Routing of the remote controller cord
- Keep the remote controller cord away from the refrigerant piping and the drain piping.
- To protect the remote controller cord from electrical noise, place the cord at least 5cm away
from other power cables (audio equipment, television set, etc.)
- If the remote controller cord is secured to the wall, provide a trap at the top of the cord to pre-
vent water droplets from running.
INSTALLATION
15
Advertisement
Table of Contents
