Autoopen - Miele G 5260 Operating Instructions Manual

Programme options

AutoOpen

In some programmes, the door auto-
matically opens slightly to assist the
drying process.
This programme option can be deactiv-
ated if you wish.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the  button in and, whilst
holding it in, switch the dishwasher
on using the  button.
Keep the  button pressed in for at
least 4 seconds until the  indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
56
 Press the  programme selection
button 7 times.
The top left indicator light will flash rap-
idly 7 times at intervals.
The flashing sequence in the display in-
dicates whether the AutoOpen pro-
gramme option is activated or not:
-  : AutoOpen is activated
-  : AutoOpen is deactivated
 Press the  button to change the
setting.
The setting is now saved.
 Switch the dishwasher off with the 
button.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.