Table of Contents
Advertisement
Clean the detergent dispenser tray
3.
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
Fit the insert and lock it in place
4.
(push the cylinder onto the guide
pin).
Push in the detergent drawer.
5.
Leave the detergent drawer open
Note:
so that any residual water can
evaporate.
Cleaning and maintenance
Cleaning the measuring aid A
for liquid detergent
If it contains liquid detergent residue:
Hold the measuring aid, pull the
1.
cover upward and disconnect them.
Clean the measuring aid and cover
2.
with water and brush.
Install the cover back to the
3.
measuring aid. Pay attention to the
assemble mark, and press the cover
until click sounds.
Clean the measuring aid
Note:
regularly to avoid residue and
blockages.
*
depending on the model
en
*
39
Advertisement
Table of Contents
