Set Alarms; Clear - DAVIS WeatherLink Software User's Manual

U S
S I N G T H E O F T W A R E
Setup Menu

Set Alarms

You may quickly set the alarm thresholds on the station console using the soft-
ware. Consult your station manual for information on the available alarms and
how they work.
1. Choose Set Alarms from the Setup menu or press Ctrl-A.
The Set Station Alarms dialog box appears.
2. Enter the following information:
High/Low Alarm
For all of the standard high/low alarms, enter the desired alarm threshold
into the text box. To clear an alarm, delete the contents of the text box.
Dew Point
Turn on the dew point alarm by selecting the check box. Clear the alarm by
"de-selecting" the check box.
Barometer
Select the desired change per hour which will trigger the barometer alarm.
To clear the alarm, select Off.
Time
Enter the time at which the alarm should be triggered into the text box. To
clear the alarm, delete the contents of the text box.
3. When finished entering alarm information, choose Set.
The software sets the alarms on the station console to match the settings in this
dialog box.

Clear

You may quickly clear high/low registers and rainfall totals from the software.
Note: This command will not clear the highs and lows on the bulletin if it is running.
28
S S A
ET TATION LARMS