To Set The Time - DAVIS Weather Echo Install Manual

Note: In the Highs and Lows mode, press the MODE key once to change to the home screen. In the
Set-up mode, press and hold the MODE key for 4 seconds to return to the home screen.
To set the unit to power saving mode:
Press and hold the + and - keys simultaneously for 4 seconds in Mode 1.
A bull's-eye appears in the bottom left corner of the display, to indicate
the unit is in power saving mode. In power saving mode, you see the
bull's-eye most of the time except when it blinks off as the unit receives
information.
Note: In power saving mode, battery life increases by 25 to 50% and the average wind speed updates
every minute. When you press a key, the unit updates as if in normal mode. The unit returns to
power-saving mode after 10 minutes of keyboard inactivity. If you are using your Weather
Echo or Weather Echo Plus with a SensorLink transmitter, you cannot use the power
saving mode.
To restore the unit to normal power mode:
Press the + and - keys together for 4 seconds to return to normal power mode.
In normal power mode, the bull's eye is not visible most of the time
except when it blinks on as the unit receives information.
Setting up the Current Information
Follow the sequence below to set up current information on the display.

To set the time:

1. Press the MODE key and hold down for at least four seconds until the display changes.
The screen changes from the default screen to the screen below and the first
of the time digits flashes.
2. Input the correct digit value using the + or - key.
Note: You need to input the time in 24 hour format. For example, 3PM is 15:00.
3. Press the SET key to accept the value and move on to the next digit.
4. Repeat steps 2 and 3 to input the remaining time digits.
Setting up the Weather Echo/Weather Echo Plus
Flashing digit
ID CODE
TIME
S
ETTING THE
MONTH
DAY
YEAR
. .
TOTAL RAIN
.
in
T
IME
Page 11