DAVIS Weather Echo Install Manual page 10

S
ETTING UP THE
Before you begin to read data from your display, you need to set up:
The display preferences
The current information
You also need to calibrate for barometric pressure and rainfall.
Setting up the Display Preferences
If you have a US model, the default display unit for rainfall is inches. If you
have an OV model, the default display unit for rainfall is millimeters.
To display data in English or Metric units:
Press and hold down the SET key for 4 seconds in Mode 1.
All measurement units in all modes change to Metric.
Press the SET key a second time to view wind speed in meters per second (m/s).
All measurement units in all modes remain in Metric.
Press and hold down the SET key for 4 more seconds to return to English units.
To change the screen contrast:
Hold the + button down to increase the screen brightness.
Hold the - button down to decrease the screen brightness.
You can pick one of the following four screens to be your home screen:
Outside humidity
Inside humidity
Windchill
Dewpoint
To choose the home screen:
Use the + and - buttons to cycle through the four screens.
The screen you leave visible becomes your home screen.
Page 10
W E
EATHER CHO
N
TEMPERATURE
W E
km/h
S
M
ETRIC
/W E
EATHER CHO
¡
OUT IN
FORECAST
¡
DEW POINT
BAROMETER RAIN
TOTAL
.
.
hPa
S
CREEN
P
LUS
¡
mm
Weather Echo