Page 1
Do not playback the system update file on any speaker or headphone system as this could lead to damage to equipment and/or hearing loss. Korg or any of its affiliates will not accept responsibility for any damages, personal loss or injury that may result from playback of the file.
Page 2
1.01 ver. 1.02 System version 1.03 If the current system is version 1.03, the display will be lit as shown. Your volca beats is already up to date. ver. 1.03 Connect the audio output of your playback device to the SYNC IN connector on your volca beats.
Page 3
Make sure all other applications are shut down and do not operate you computer during the update. The update will take approximately two minutes. Do not turn your volca beats off or stop playback while update is in progress.
Page 4
Go back to step 2 of “Preparations” and check that your volca beats has been updated. Tips Update may fail with some audio players, computers or software. If this is the case, please try with a different device. If you are having trouble with the update, please check the following: ...