Davis Instruments Radio Surge Protector User Manual

The Radio Surge Protector provides surge protection between any antenna
cable with BNC connector and the UHF radio modem (UHF-RM), spread-spec-
trum radio modem (SS-RM), or cellular telephone modem (CTM). The use of
the Radio Surge Protector is essential if the UHF-RM, SS-RM, or CTM is being
used in an area where lightning induced surges are a possibility.
Note: Davis recommends the use of the Radio Surge Protector for all wireless installations.
C
OMPONENTS
The Radio Surge Protector comes with the following components. Please make
sure you have all listed components before continuing.
Radio
Surge
Protector
12" BNC Connector Cable
Included with #7863 (Radio
Surge Protector for Spread-Spectrum
and UHF) only
R
A D I O
P
R O T E C T O R
F C
O R E L L U L A R
S - S
P R E A D P E C T R U M
UH F R
A N D
Ground Lug
#10-32 x 1"
Machine Screw
Aluminum
Spacer
S
U R G E
T
E L E P H O N E
R
A D I O
M
A D I O O D E M
Internal Tooth
Lock Washers
Ground Wire
M ,
O D E M
M ,
O D E M
#10-32
Hex Nut
Product # 7861 & 7863