USB
Chipset:
-
1 x USB Type-C
-
1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
-
6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
-
4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
1 x CPU fan header
3 x system fan headers
1 x addressable LED strip header
1 x RGB LED strip header
6 x SATA 6Gb/s connectors
1 x M.2 Socket 3 connector
1 x front panel header
1 x front panel audio header
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
2 x Thunderbolt
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
1 x serial port header
1 x Clear CMOS jumper
1 x Q-Flash Plus button
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x DVI-D port
1 x DisplayPort
1 x HDMI port
1 x USB Type-C
1 x USB 3.2 Gen 2 Type-A port (red)
4 x USB 3.2 Gen 1 ports
1 x RJ-45 port
3 x audio jacks
I/O Controller
iTE
I/O Controller Chip
®
Hardware
Voltage detection
Temperature detection
Monitor
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.
port on the back panel, with USB 3.2 Gen 1 support
™
add-in card connectors
™
port, with USB 3.2 Gen 1 support
™
- 7 -