Charging With The Supply Unit; Switching The Appliance On And Off; Cleaning And Maintenance - Philips S529 Manual

Charging
Charge the appliance before first use
and when the appliance start working
more slowly.
Charging takes approx. 10 hours. A
fully charged shaver provides up to
20 minutes of shaving time.

Charging with the supply unit

1 Put the small plug in the shaver.
2 Put the supply unit in the wall
socket (Fig. 4).
-
The charging light on the
supply unit lights up
continuously when connected
to wall socket.
-
The light on the supply unit
does not change color and
does not go out when the
appliance is fully charged.
3 After charging, remove the supply
unit from the wall socket and pull
the small plug out of the
appliance.
Using the appliance
Removing or attaching the
click-on attachments
1 Make sure the appliance is
switched off.
2 Insert the lug of the attachment
into the slot in the top of the
appliance. Then press down the
attachment to attach it to the
appliance ('click') (Fig. 5).
3 Pull the attachment straight off
the appliance (Fig. 6).
Note: Do not twist the attachment
while you pull it off the appliance.
Switching the appliance on
and off
1 To switch on the appliance, slide
the on/off button up (Fig. 7).
2 To switch off the appliance, slide
the on/off button down (Fig. 8).
Shaving
Skin adaptation period
Your first shaves may not bring you
the result you expect and your skin
may even become slightly irritated.
This is normal. Your skin and beard
need time to adapt to any new
shaving system. To allow your skin to
adapt to this new appliance, we
advise you to shave regularly (at
least 3 times a week) and exclusively
with this appliance for a period of 3
weeks.
Dry shaving
1 Switch on the appliance.
2 Move the shaving heads over
your skin in circular movements to
catch all hairs growing in different
directions (Fig. 9). Exert gentle
pressure for a close, comfortable
shave.
Note: Do not press too hard, as
this can cause skin irritation.
3 Clean the appliance after use (see

'Cleaning and maintenance').

Cleaning and maintenance
Cleaning the shaver under the
tap
Clean the shaver after every shave
for optimal performance (see
'Cleaning and maintenance'). Always
unplug and switch off the shaver
before you clean it.
Never use compressed air, scouring
pads, abrasive cleaning agents or
aggressive liquids such as petrol or
acetone to clean the appliance.