Sony WI-SP510 Help Manual page 70

Help Guide
Wireless Stereo Headset
WI-SP510
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and control the device from your
headset via Bluetooth connection.
A2DP (Advanced Audio Distribution Profile)
You can enjoy high-quality music wirelessly.
AVRCP (Audio Video Remote Control Profile)
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Connect the headset to a Bluetooth device.
1
Put on the headset.
2
Place the neckband on your neck so that the remote control component is on your left side, and put the left and
right units on your ears. There are tactile dots on the remote control components and left unit.
Move the neckband and the left and right units up, down, left and right to adjust them into a position where they fit
well.
A: Tactile dot
Secure the arc supporter to your ear grooves.
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Adjust the volume by pressing the +/– buttons of the headset.
4
There is a tactile dot on the + button.
70