Software Update; Remote Diagnostics - Bosch PXY8 D Series Instruction Manual

Home Connect
en
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the symbol repeatedly until
t
3.
displayed alternately.
lights up in the cooking position display.
‹
Set the value on the control panel.
‚
4.
Follow the instructions in the app to complete the
5.
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking zones to the hob.
Notes
Before you can change the basic settings, the hob
■
must be switched off.
If the appliance is being operated by means of the
■
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
When the appliance is delivered, the settings
■
transmission option is already activated by default.
If the settings transmission option has been
■
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the t symbol repeatedly until
3.
displayed alternately.
To activate the transfer, select the
4.
control panel. To deactivate the transfer, select the
value.
48
t symbol for four seconds.
and
•'
symbol for four seconds.
t
•' and
‚ value on the
Confirming settings
As soon as cooking settings are transmitted to a
cooking zone, the cooking zone display, the ZoneLight
are
ƒ
lights, the timer display or the modified function start to
flash, depending on the setting. To confirm that you
want to use these settings, touch the display for the
required cooking zone. To discard the settings, touch
any hob sensor.

Software update

Using the software update function, your hob's software
can be updated (e.g. for the purpose of optimisation,
troubleshooting or security updates). To do this, you
need to be a registered Home Connect user, have
installed the app on your mobile device and be
connected to the Home Connect server.
As soon as a software update is available, you will be
informed by the Home Connect app, from which you will
also be able to download the update.
Once the update has been successfully downloaded,
you can start installing it via the hob (basic settings,
setting) or the Home Connect app if you are on
•'†
your local area network.
The Home Connect app will notify you once installation
is complete.
Notes
You can continue to use your hob as normal while
■
updates are downloading.
Depending on your personal settings in the app,
■
software updates can also be set to download
automatically.
We recommend that you install security updates as
■
soon as possible.

Remote diagnostics

If a fault occurs, the after-sales service can use remote
diagnostics to access your appliance.
Contact the after-sales service, making sure that your
appliance is connected to the Home Connect server
and checking that the remote diagnostics service is
... are
available in your country.
Note:
‹
For more information and to check whether the remote
diagnostics service is available in your country, please
visit the Help & Support area of the Home Connect
website for your country: www.home-connect.com