Accessing An Nfs Export - Dell EqualLogic FS7610 Series Installation And Setup Manual

Dell EqualLogic FS7610 Installation and Setup Guide
4. In the Connect As dialog box, enter a valid user name and password, then click OK. Note that you can enter
CIFSstorage\administrator
Users can now log in to the CIFS share and perform read and write operations. The default permission is to
disallow guest access. You can modify the share to allow guest access.
For complete information about accessing CIFS shares, and setting ACLs or SLPs on a CIFS share, see the Dell
EqualLogic Group Manager Administrator's Manual and the online help available from the Group Manager GUI
interface.

Accessing an NFS Export

If you plan to use NFS over TCP, set up the firewall first:
1. Adjust the firewall to allow the FS7610 controllers to be the source IP.
2. Open the firewall to allow for port ranges.
To mount an NFS export on a UNIX system, log in as
recommended options and parameters:
mount -o rw,bg,hard,nointr,tcp,vers=3,timeo=2,retrans=10,rsize=32768,
wsize=32768 client_access_vip:hostname:/container_name /exported_directory /local_directory
The
exported_directory
Because the default trusted user setting is "All except root," only users other than
You can modify the export and change the trusted users to "Nobody" or "All."
In addition:
• The default client access permission provides access to all clients. You can modify the export and limit
access to specific IP addresses.
• The default access type is read-write. You can modify the export and change it to read-only.
For complete information about accessing an NFS export, see the Dell EqualLogic Group Manager
Administrator's Manual and the online help available from the Group Manager GUI interface.
32
for a user name and the CIFS password that you set previously.
must be the full path name that you specified when creating the NFS export.
and run the command with the following
root mount
6 NAS Storage Allocation
can access the export.
root