Pump And Filter Assembly; Disassembly - Quik Swim Pool QS-1648 Owner's Manual

Equipment assembly / Pool disassembly
10
Step 8:
With the skimmer and return fittings now in place, assemble the pump and filter package and connect
the hoses according to the diagram below. (Equipment may vary by dealer)
To
Return
(Hair & Lint Trap Optional)
From
Skimmer
Step 9:
Before you start filling the pool with water, assemble and secure the ladder with the ladder straps
included. Refer to the ladder instructions for assembly procedures.
Step 10:
Fill pool to middle of skimmer and enjoy your new pool! You have now completed the installation proc-
ess and are ready to start enjoying the benefits of pool ownership. Be sure to retain this manual for fu-
ture reference.
Disassembling the pool:
Step 1:
Drain pool completely and dry all moisture off of the liner. This will prevent mildew or algae growth while
in storage:
Step 2:
Remove all top rails, T– connectors, vertical tubes, and bottom feet and store.
Step 3:
Make sure that all of your pool items are stored in a cool dry place without sun exposure.
Rev. 11/13