6
Attach the pump hose to the hose reel swivel.
The hose reel is now ready for operation.
Be sure all fittings are tight.
Be sure the unit is securely mounted.
Do not over pressurize the system. Be sure there are no leaks.
Release the pin lock to unwind the hose. Replace the pin in the lock position after the hose has been
rolled out.
Be sure the pin lock is in the locked position, especially if the unit will be moved.
Clean and wipe down your hose reel as necessary
Before Each Use
⚠WARNING
Operating Instructions
⚠WARNING
After Each Use
⚠WARNING
Page 7 of 11