Advertisement
9 How to install
Do not plug the power cord until installation finished completely.
Not doing so could damage the appliance.
If electric work needed, contact to the qualified electrician or serviceman only.
Remove the existing toilet lid and seat
1. Remove the nuts, washers and cone packings from the toilet seat mounting bolts
in the back of the toilet.
2. Remove the toilet seat, lid and mounting bolts.
3. Keep them in case of installing again.
Install the appliance
Installation
Insert the mounting bolts through the mounting holes,
and slide cone packings and washers onto the mount-
ing bolts.
Then put the nuts and tighten them.
Mounting bolts
Mounting holes
Cone packings
Washers
Mounting nuts
Toilet size (elongated)
The toilet demensions must be within those shown
below.
Do not install the USPA on a toilet that does not meet
those demational requirements.
Human Body Detective Sensor
This appliance is equipped with Human Body Detective
Sensor that prevents working while seat is not occupied.
When a user stands up while using, all operation will stop
automatically.
Human Body Detective Sensor
Seat
Advertisement
