Advertisement
6 How to use
Caution
Be aware of not drowning a remote control in water.
It may cause out of order or malfuction.
All functions will be operated when the seat is accupied except Nozzle Cleaning.
Stop
Press "STOP" to stop all operation.
When a user stands up, all operation will stop automatically.
Cleansing
Press "CLEANSING" to clean the posterior. The function stops in a minute
automatically.
Press "CLEANSING" again to activate moving wash. The nozzle moves back
and forth automatically to widen cleansing area.
Bidet
Press "BIDET" for front cleansing. The function stops in a minute automa-
tically.
Press "BIDET" again to activate oscillating. The nozzle moves back and
forth automatically to widen cleansing area.
Dry
Press "DRY" button after "CLEANSING" or "BIDET". Dry function stops in 3
minutes automatically.
To alter the strength of air drying, press "DRY" again.
Air
Press "AIR" to use aerated water spray from a special built in airpump.
Stronger but smoother aerated water spray can save water consumption.
Massage
Press "MASSAGE" to provide pulsating water spray for feeling better.
Press "MASSAGE" again to stop the opreration.
Move
During the operation of CLEANSING or BIDET, press "MOVE" to activate
moving wash.
The nozzle moves back and forth automatically to widen cleansing area.
Press "MOVE" again to stop the operation.
Nozzle Position Adjustment
The postion of nozzle can be adjusted by pushing "FR" or "BK" for your
setting position.
Extra Operating Panel
Use this extra panel when the remote control is
broken or its batteries are replaced.
All operation is the same as remote control operation.
Do not use sharp edge things to press a remote
control or extra control panel.
For more information of
Nano-Silver technology or Anion
Please refer to Contents page.
Auto
Press "AUTO" during the operation of CLEANSING, Cleansing washing,
moving washing and Dry will be operated for each 20 seconds automatically.
If BIDET AUTO wanted, press "BIDET" and "AUTO" consecutively.
Temperature Adjustment
Water temperature and seat temperature can be adjusted to your setting
level by pushing "'HI" or "LO".
There are 4 levels (room temp, low, middle and high).
Water Pressure / Dry Temperature adjustment
The strength of water spary pressure can be adjusted by pushing "HI" or "LO"
for your desired level. (5 levels)
The temperature of air dry can be adjusted by pushing "HI" or "LO" for your
desired level. There are 5 levels for both fuctions. (5 levels)
Power Saving
Press " ECONOMY" to save the electric power. In the economy mode,
temperature of water and seat keep to 30 celsius degree. Green light will be
shown on the extra panel. When the unit is occupied in the economy mode,
temperature is changed to desired level and goes back to 30 celsius degree
automatically after using.
Press "ECONOMY" again to release the economy mode. Red light will be
turned on. Temperatures are kept to desired level all the times.
Self Cleaning
This appliance keeps clean itself automatically by rinsing off the nozzles
before and after operation of BIDET or CLEANSING.
Nozzle Cleaning
Press "FR" to clean the CLEANSING nozzle manually while not sitting on the
seat(not occupying)
Press "FR" again or "STOP" to return the nozzle to stand by mode.
Press "BK" to clean the BIDET nozzle manually while not sitting on the seat
(not occupying)
Press "BK" again or "STOP" to return the nozzle to stand by mode.
Do not forcefully push or pull the nozzles or bend them.
Automatic Deodorizer
When the appliance is in use, the deodorizer operates for up to 20 minutes
automatically.
When a user stands up during the operation, it stops in a minutes.
Self-diagnosis System
This appliance has a self-dianostic system, whenever the appliance has a
problem, a LED of seat temperature or water temperature will blink.
Unplug the electric power cord and contact to your dealer or us.
Advertisement
