Advertisement
Quick Links
Advertisement
Related Manuals for FarmTek 1820SVSPC
Summary of Contents for FarmTek 1820SVSPC
- Page 1 CANOPIES Sunblocker Shade House 18' Wide Photo may show a different but similar model. STK# DIMENSIONS 1820SVSPC 18’ W x 20’ L 1830SVSPC 18’ W x 30’ L ©2015 FarmTek® All Rights Reserved. Reproduction 1840SVSPC 18’ W x 40’ L is prohibited without permission.
-
Page 2: Safety Precautions
BEGIN TO ASSEMBLE THE SHELTER. • Never erect the structure under power lines. Thank you for purchasing this FarmTek® shelter. When • Identify whether underground cables and pipes are properly assembled and maintained, this product will present before preparing the site or anchoring the provide years of reliable service. -
Page 3: Assembly Procedure
These words and phrases are common to most joints and to fasten brackets to rafters. FarmTek® shelters and identify the different parts of the shelter. (Some are used in this document. Others may not apply to this particular shelter.) These terms describe the shipped parts and can also be found on the materials list/spec sheets included with the shipment. -
Page 4: Required Tools
CANOPIES REQUIRED TOOLS ALTERNATIVE ASSEMBLY INFORMATION The following list identifies the main tools needed to These instructions describe assembling the entire roof assemble the shelter. Additional tools and supports may be section of the shelter first. The frame is then lifted and the needed depending on the structure, location, and legs added. - Page 5 CANOPIES The following graphics and photos will help you identify the different parts and show you how they are used. (Some parts are not shown.) CC4595 102193 102194 Tie Down 8'' Snugger Ball 4-Way Coupler 3-Way Coupler ADDITIONAL PARTS IDENTIFICATION NOTES In some instances, there can be differences between the parts that are shown and referenced in the instructions and the parts that are shipped with the shelter.
- Page 6 CANOPIES Sunblocker Shade House Main Cover Installation Note: If the conditions are calm, the main cover can be installed after the main roof frame is assembled as shown below. Do not install the main cover during windy or stormy conditions. ASSEMBLE THE MAIN ROOF FRAME This section is an overview of the process for assembling your roof frame.
- Page 7 CANOPIES INSTALL LEGS This section is an overview of the process for attaching your legs to the roof frame. See illustration below to identify main parts of the frame. 1. Using the leg pipes, insert the legs into the 3-way and 5.
- Page 8 CANOPIES INSTALL THE MAIN COVER After assembling the main frame, install the main frame cover. Gather the parts: • Snugger ball tie downs (#CC4595) • Main cover and side panels (if equipped) NOTE: Assistance is required to assemble the shelter. 1.
-
Page 9: Care And Maintenance
Never pack the covers when they are wet. Always dry them before you pack the shelter. • For replacement or missing parts, call 1-800-245-9881 for assistance. NOTE: With the exception of Truss Arch buildings, FarmTek® shelters and greenhouses do not have any tested loading criteria. Revision date: 10.13.15... - Page 10 CANOPIES 11'-6 15/16" Height QUICK START GUIDE 18' Wide Sunblocker Shade House 6'-5" Endwall Height 17'-4 7/8" Width FRONT Grid Represents 12" Squares NOTE: Actual frame may differ from frame shown. Revision date: 10.13.15...
- Page 11 CANOPIES Revision date: 10.13.15...
- Page 12 CANOPIES Revision date: 10.13.15...
- Page 13 CANOPIES Revision date: 10.13.15...
- Page 14 CANOPIES Revision date: 10.13.15...
- Page 15 CANOPIES Revision date: 10.13.15...