Advertisement
7. Pull cover down as far as possible
down over all four tires as shown in
figure.
NOTE: The shown figure is for two
passenger vehicle. This figure is for
reference only.
8. Ratchet webbing tight. Guide webbing
into spool. Apply about 10-15 ft. lbs.
(13.5-20 Nm) of pressure on the handle.
9. Attach the male buckle (E) of the straps
to the female buckle sewn to the cover.
Feed the webbing underneath the
machine and connect the buckles on
the opposite side. Cinch tight by pulling
any excess slack underneath the
footwells as shown in figure.
WARNING:
Ensure the cover is adequately tensioned prior to trailering the unit.
Never trailer covered unit in excess of the speed limit.
Trailer the covered unit in a forward facing direction ONLY.
P/N 9925260 Rev 01 05/14 Page 3 of 3
E
E
Advertisement
