Subscribe to Our Youtube Channel
Related Manuals for Clarke CAT212
Summary of Contents for Clarke CAT212
- Page 1 MULTI-NOZZLE BLOW GUN MODEL NO: CAT212 PART NO: 3120529 OPERATING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1019 - ISS 1...
-
Page 2: Specification
INTRODUCTION Thank you for purchasing this CLARKE Blow Gun. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Compressed Air Requirements
COMPRESSED AIR REQUIREMENTS WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF COMPRESSORS AND COMPRESSED AIR SUPPLY. Use only clean, dry, regulated compressed air as a power source. Air compressors used with the tool must comply with the appropriate European Community Safety Directives. -
Page 4: General Safety Rules
GENERAL SAFETY RULES CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY. WORK ENVIRONMENT 1. Keep the work area clean and tidy. 2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair out of the way. -
Page 5: Before Use
5. Your blow gun is now ready for use. You can fit a whip hose with a quick fit coupling if required, available from your CLARKE dealer. DISCONNECTING THE AIR SUPPLY 1. DO NOT disconnect the airline until the supply is isolated at a shut-off valve. -
Page 6: Maintenance
Your CLARKE blow gun has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the item to your local CLARKE dealer. -
Page 7: Component Parts
COMPONENT PARTS Description No Description Main Housing Air inlet Spring Trigger Valve stem O-ring Nozzle adaptor O-ring Short nozzle O-ring Medium nozzle O-ring Long nozzle Valve seat Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CAT212 and is the answer not in the manual?
Questions and answers