Permobil 1825342 Manual
  1. Manuals
  2. Brands
  3. Permobil Manuals
  4. Receiver
  5. 1825342
  6. Manual

Permobil 1825342 Manual

8 channel rf receiver
Hide thumbs
1
2
3

Advertisement

Table of Contents

General

This radio frequency (RF) receiver can be wired into powered devices (such as a door
opener) so it can be operated by sending an RF signal from an environmental control
device.
• This RF receiver is an eight-channel receiver with eight voltage-free relay switches.
• Each Ouput has a unique channel number (256 possible channels) and can be
easily programmed.
• The receiver relays can independently be set for bistable (latching - continuous) as
well as monostable (non-latching - temporary) function.
o Monostable - Temporary: the output remains closed as long as the receiver
receives a command (can be compared with a push button).
o Bistable - Continuous: the situation of the output (open/closed) changes each
time a command is received (can be compared with a switch).
• The receiver module is equipped with 8 direct control buttons. This allows switching
a channel without the need of a RF transmitter. This is very helpful during
installation, testing or access by a third.
Technical manual, 8 Channel IR Receiver
Document Number: 205317-UK-0 Edition 1 2009-12
8 Channel RF Receiver
Spare part no: 1825342
Page: 1/3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1825342 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Permobil 1825342

Summary of Contents for Permobil 1825342

  • Page 1 8 Channel RF Receiver Spare part no: 1825342 General This radio frequency (RF) receiver can be wired into powered devices (such as a door opener) so it can be operated by sending an RF signal from an environmental control device.
  • Page 2 Installation of the Receiver This RF receiver needs to be installed in a dry place by a skilled technician who is familiar with installing home automation devices. All electrical connections are done using connectors. This minimizes the installation time and provides a fast switch of the module in case a replacement is necessary. •...
  • Page 3 Configuration of the Receiver The receiver can be configured in a way that each channel responds to a unique RF code. At the same time each channel can be set as monostable (non-latched) or bistable (latched) output. How do we enter configuration mode? •...

Table of Contents