CAUTIONS:
1. To locate the phone set base in a dry and ventilated place without corrosive air.
2. Before operation pls check if you had imply caller ID service to telecom office. Otherwise,
the phone set fails to receive the incoming call number normally. But this can not effect
the use of its normal function.
FEATURES:
FSK/DTMF dual system
•
61 incoming call memories, call back function
•
16 outgoing call memories and conversation time review and redial back
•
Local area code filter
•
LCD display of month, date and time
•
5 levels of LCD contrast
•
OPERATION:
1.Function setting:
Press and hold SET key to enter menu setting, the phone LCD will display SET 1 DATE,
press UP key to select different options. Press SET key again to confirm. Use UP key to
select the mode you need. After completing the setting, press SET key to go to the next item.
To exit menu, press DEL key.
By pressing SET key (in the on-hook mode), you can select the following:
SET ITEM
DATE/TIME
LCD panel displays SET 1 DATE, press SET key to enter this mode.
The year value would flash, use UP key to select value, then press SET
key to move to next item.
AREA CODE
LCD panel display SET 2 CODE, press SET key to confirm, LCD
display CODE, press SET key to enter this mode. Use UP key to select
value, then press SET key to move to next item.
Area Code is used to filter the number for incoming calls. E.g. Area
code = 75 when there's incoming call with 75 6554556, it will be
displayed as 655 4556 only.
PABX CODE
LCD panel display SET 3 PCODE, press SET key to enter this mode.
LCD displays PCODE, use UP key to select value, then press SET key
to confirm.
To activate this feature, while on-hook, dial the number then press
REDIAL/BACK. When the first number matches the PCODE, the
OPERATIONS