Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION INSTRUCTIONS FOR
STRATUS 100-44 XT
STRATUS 125-44 XT
SAFETY INFORMATION
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rayburn STRATUS 100-44 XT
Summary of Contents for Rayburn STRATUS 100-44 XT
- Page 1 INSTALLATION AND OPERATION INSTRUCTIONS FOR STRATUS 100-44 XT STRATUS 125-44 XT SAFETY INFORMATION WARNING If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 2: Table Of Contents
Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Rayburn product. IMPORTANT INSTRUCTIONS............................3 UNPACKING AND TESTING APPLIANCE .......................5... -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS 1. Read all instructions before installing or using this heater. 2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front of the heater; keep them away from sides and rear as well. 3. - Page 4 Cautions ·Always install the heater in accordance with this guide. If in doubt obtain expert advice. ·Always make sure the electrical socket is accessible and located adjacent to, but not above the heater. ·Always disconnect the heater from the electrical supply before moving it, or Do’s carrying out cleaning, maintenance.
-
Page 5: Unpacking And Testing Appliance
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 230V electrical socket. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly. -
Page 6: Stratus 100-44 Xt
STRATUS 100-44 XT This appliance has been tested in Description Built-in Appliance accordance with the EN 60335- Voltage 230V AC 50Hz 1:2012 + A11:2014 + A13:2017,EN Watts 1900W Max 60335-2-30:2009 + A11:2012, EN NO HEATER 28.6W 62233:2008. If you need assistance... -
Page 7: Stratus 125-44 Xt
STRATUS 125-44 XT Model Number Built-in Appliance This appliance has been tested in accordance with the EN 60335- Voltage 230V AC 50Hz 1:2012 + A11:2014 + A13:2017,EN Watts 1900W Max 60335-2-30:2009 + A11:2012, EN NO HEATER 33.6W 62233:2008. If you need assistance MOTOR HEATER during installation, please contact Appliance Width... -
Page 8: Safety Drill Screw Area
SAFETY DRILL SCREW AREA There is a safety drill screw area as show below. Please make sure that the fix screws are in this area. Sa fe ty d rill s cre w a re a (Da rk a re a ) The manual control pad position... -
Page 9: Installation
It is recommended that two people remove the surround. The rough wall opening size of the fireplace: W(＂) D(＂) H(＂) STRATUS 100-44 XT 12 1/2 STRATUS 125-44 XT 12 1/2 1. Take out the unit from the box. Please do the pre-test before you install the fireplace. Pull out the optional trim from the unit as shows below. - Page 10 2. Remove the framing plates from the unit framing plate 3. Re-fix the framing plates to the unit as the picture shows framing plate...
- Page 11 4. Bend up the framing plates. 5. Put the unit into the opening.
- Page 12 6. Drive the mounting screws into the framing plates on the unit and the wall studs. framing plate 7. After checking that the fireplace operates properly, cover the glass panel with protective plastic bag and install plywood or drywall. IMPORTANT NOTE: IF YOU WANT TO USE THE SUPPLIED SURROUND the thickness of the wall finish can only be 1”.
- Page 13 8. Decorate the plywood or drywall with glazed tile, wallpaper, etc. Fireplace 9. Put back the trim that you’ve removed from the unit at STEP 1. trim...
-
Page 14: Media Options
MEDIA OPTIONS The STRATUS XT series are shipped with 11-PIECE-LOG, AMBER GLASS and VERMICULITE. 1. Vermiculite 2. Amber glass 3. 11-piece log... - Page 15 FIRE GLASS MEDIA-LOG INSTALLATION 1. Take off the front clear glass. There is a bracket that holds the front glass as shows below. Unscrew the screw to take off the bracket. Turn around the bracket and insert it into the gap to hook and pull out the glass.
-
Page 16: Operation
OPERATION The fireplace can be operated either by the switches located on the left bottom of the fireplace unit or by supplied remote control. Plug the fireplace into a13 Amp wall socket. MANUAL OPERATION 1、Press key . Press for the first time, heater work at 1900W, indicator lights red. - Page 17 REMOTE CONTROL OPERATION Press the remote control’s key“ ”, its screen turns on, the flame ignites and the flame icon appears on 、 the LCD screen of the remote control. Week, time (24h system), and temperature setting are displayed normally. Press it again, the screen of the remote control will turn off; Key“...
- Page 18 7、 Press the heating key“ .” Press for the first time ,the heating elements work at 1900W, the LCD screen displays , the indicator on the machine lights red. Press a second time , the heating elements work at 950W, the LCD screen displays , the indicator on the machine lights blue.
- Page 19 for Tuesday. Press for the 7th time and it displays . Press for the 8th time and it exits and recovers to the current week day; 11、Press“ .” Press for the first time and the timing function turns on, the LCD screen displays the machine’s indicator lights green.
-
Page 20: Care And Maintenance
CARE AND MAINTENANCE 1. Switch off and unplug from the power supply before cleaning. 2. Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface of the products. CAUTION: Allow the product to completely cool before handling or cleaning it. 3. -
Page 21: Replacement Parts
REPLACEMENT PARTS This list contains replacement parts PART NUMBER DESCRIPTION STRATUS 100-44 XT STRATUS 125-44 XT BLOWER AND HEATER 602032B ASSEMBLY(FRT60-420) FIREPLACE BOX 10104002 SWITCH 601035 CONTROL PANEL 601095F CIRCUIT BOARD 10101221C FLAME MOTOR 3109503C 3057503C FLICKER ASSEMBLY 601136B LED STRIP... -
Page 22: Exploded View
EXPLODED VIEW... -
Page 23: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and glowing or dimming replace them if necessary. Appliance turns off and Appliance has over heated and Turn off the main switch, allow... -
Page 24: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:... -
Page 25: Warranty
Warranty FREESTANDING ELECTRIC – 2 YEAR EXTENDED WARRANTY If you have purchased your stove from an authorised stockist within our Retailer Network, then automatically your product will carry a standard 1 year warranty. The 1 year warranty can be further extended to a total warranty period of 2 years by registering your Stove within 60 days of the purchase date or installation date whichever is shortest. - Page 26 The Extended Warranty does not cover: a) In normal usage the paint finish of your Stove may change colour slightly. As these circumstances are considered normal, they are not covered by the warranty. b) Enamelled components where these parts are subjected to abnormally high temperatures, chemical abrasion or thermal shocks, resulting in chipping, cracking, bubbling or discolouration and crazing of the enamelled finish.
Need help?
Do you have a question about the STRATUS 100-44 XT and is the answer not in the manual?
Questions and answers