Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION INSTRUCTIONS FOR
STRATUS 75-30 XS
STRATUS 100-30 XS
STRATUS 125-30 XS
SAFETY INFORMATION
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rayburn STRATUS 75-30 XS
Summary of Contents for Rayburn STRATUS 75-30 XS
- Page 1 INSTALLATION AND OPERATION INSTRUCTIONS FOR STRATUS 75-30 XS STRATUS 100-30 XS STRATUS 125-30 XS SAFETY INFORMATION WARNING If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
-
Page 2: Table Of Contents
Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Rayburn product. IMPORTANT INSTRUCTIONS........................... 3 UNPACKING AND TESTING APPLIANCE ...................... -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS 1. Read all instructions before installing or using this heater. 2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front of the heater; keep them away from sides and rear as well. 3. - Page 4 Cautions ·Always install the heater in accordance with this guide. If in doubt obtain expert advice. ·Always make sure the electrical socket is accessible and located adjacent to, but not above the heater. ·Always disconnect the heater from the electrical supply before moving it, or Do’s carrying out cleaning, maintenance.
-
Page 5: Unpacking And Testing Appliance
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 230V electrical socket. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly. -
Page 6: Stratus 75-30 Xs
STRATUS 75-30 XS Description STRATUS 75-30 XS This appliance has been tested in accordance with the EN 60335- Voltage 230V AC 50Hz 1:2012 + A11:2014 + A13:2017,EN Watts 1900W Max 60335-2-30:2009 + A11:2012, EN NO HEATER 62233:2008. If you need assistance... -
Page 7: Stratus 100-30 Xs
STRATUS 100-30 XS Description STRATUS 100-30 XS This appliance has been tested in accordance with the EN 60335- Voltage 230V AC 50Hz 1:2012 + A11:2014 + A13:2017,EN Watts 1900W Max 60335-2-30:2009 + A11:2012, EN NO HEATER 62233:2008. If you need assistance MOTOR HEATER during installation, please contact Appliance Width... -
Page 8: Stratus 125-30 Xs
STRATUS 125-30 XS Description STRATUS 125-30 XS This appliance has been tested in accordance with the EN 60335- Voltage 230V AC 50Hz 1:2012 + A11:2014 + A13:2017,EN Watts 1900W Max 60335-2-30:2009 + A11:2012, EN NO HEATER 62233:2008. If you need assistance MOTOR HEATER during installation, please contact Appliance Width... -
Page 9: Safety Drill Screw Area
SAFETY DRILL SCREW AREA There is a safety drill screw area as show below. Please make sure that the fix screws are in this area. Sa fe ty d rill s cre w a re a (Da rk a re a ) The manual control pad position... -
Page 10: Installation
Note: The optional steel surround is not firmly attached and can be removed from the unit by simply pulling it off. It is recommended that two people remove the surround. The rough wall opening size of the fireplace: W(＂) D(＂) H(＂) STRATUS 75-30 XS 73.66 11.5 STRATUS 100-30 XS 11.5 STRATUS 125-30 XS 124.5 11.5... - Page 11 2. Remove the optional trim from the unit as illustrated below. Remove the wall framing plates from the unit. 3. Re-attach the framing plates to the unit as shown below.
- Page 12 4. Bend the framing plates as shown. 5. Lift the unit into the wall opening. Note: Two people are required.
- Page 13 6. Drive the mounting screws through the flaming plates securing the unit into the wall studs. 7. Using desired materials, finish to the glass for a clean face installation OR re-attach the steel surround that was removed in STEP 1.
-
Page 14: Installation Wall-Mount
Wall-mount installation instructions Note: The mantel is available for Optional Purchase only and does not come with the unit. 1. Take out the unit from the box. Please do the pre-test before you install the fireplace. 2. Take the hanger from the back of the fireplace by removing screws. Select a location for the hanger to be fixed that is not prone to moisture and is located at least 0.91 m or 3 feet away from combustible materials such as curtains, drapes, furniture, bedding, paper, etc. - Page 15 3. Fix the hanger onto the wall and put the fireplace on.
- Page 16 4. Fix a bracket beneath the fireplace to ensure the fireplace won’t move.
-
Page 17: Media Options
MEDIA OPTIONS The media that come with this appliance are amber glass and vermiculite decorative media. Vermiculite Amber glass Removing the front glass Unplug the unit from the power and make sure it is switched off. Unscrew the adjustable screws to take off the front glass. -
Page 18: Operation
OPERATION The fireplace can be operated either by the switches located on the left bottom of the fireplace unit or by supplied remote control. Plug the fireplace into a13 Amp wall socket. MANUAL OPERATION 1、Press key . Press for the first time, heater work at 1900W, indicator lights red. - Page 19 REMOTE CONTROL OPERATION Press the remote control’s key“ ”, its screen turns on, the flame ignites and the flame icon appears on 、 the LCD screen of the remote control. Week, time (24h system), and temperature setting are displayed normally. Press it again, the screen of the remote control will turn off; 、...
- Page 20 7、 Press the heating key“ .” Press for the first time ,the heating elements work at 1900W, the LCD screen displays , the indicator on the machine lights red. Press a second time , the heating elements work at 950W, the LCD screen displays , the indicator on the machine lights blue.
- Page 21 for Tuesday. Press for the 7th time and it displays . Press for the 8th time and it exits and recovers to the current week day; 11、Press“ .” Press for the first time and the timing function turns on, the LCD screen displays the machine’s indicator lights green.
-
Page 22: Care And Maintenance
CARE AND MAINTENANCE 1. Switch off and unplug from the power supply before cleaning. 2. Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface of the products. CAUTION: Allow the product to completely cool before handling or cleaning it. 3. -
Page 23: Replacement Parts
REPLACEMENT PARTS This list contains replacement parts PART NUMBER DESCRIPTION STRATUS 75-30 XS STRATUS 100-30 XS STRATUS 125-30 XS 3147501 3109501 3057501 TRIM 10201505 ADJUSTABLE SCREW 3133009 FRONT GLASS BRACKET 10701273 10701248 10701250 FRONT GLASS 10702197 10702182 10702184 FLAME EFFECT GLASS... -
Page 24: Exploded View
EXPLODED VIEW... -
Page 25: Wiring Diagram
Wiring diagram... -
Page 26: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and glowing or dimming replace them if necessary. Appliance turns off and Appliance has over heated and Turn off the main switch, allow... -
Page 27: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service Technician Service Performed Special Concerns Name Name NOTES:... -
Page 28: Warranty
Warranty FREESTANDING ELECTRIC – 2 YEAR EXTENDED WARRANTY If you have purchased your stove from an authorised stockist within our Retailer Network, then automatically your product will carry a standard 1 year warranty. The 1 year warranty can be further extended to a total warranty period of 2 years by registering your Stove within 60 days of the purchase date or installation date whichever is shortest. - Page 29 The Extended Warranty does not cover: a) In normal usage the paint finish of your Stove may change colour slightly. As these circumstances are considered normal, they are not covered by the warranty. b) Enamelled components where these parts are subjected to abnormally high temperatures, chemical abrasion or thermal shocks, resulting in chipping, cracking, bubbling or discolouration and crazing of the enamelled finish.
Need help?
Do you have a question about the STRATUS 75-30 XS and is the answer not in the manual?
Questions and answers