Advertisement
Step 12. Position the New ODD (Label
side down) The bracket should be
aligned on the Right side of the ODD.
Take note of the proper alignment of the
screw holes.
ODD Installation (Steps 14-16)
Step 14. Align the ODD assembly
properly (label side down) and slide into
the computer.
Step 17. Reinstall the battery pack and
AC Adaptor.
Return the Old ODD to Sony
following the included
shipping instructions.
P/N 989201981
Rev. B
VPCEF Series Optical Disk Drive
Replacement Instructions
Step 13. Using the ODD Screws, install
the ODD Brackets onto the New ODD.
Step 15. Make sure the New ODD is
seated flush on the edge of the
computer.
3/3
NOTE: All brackets should sit flush
with the ODD.
Step 16. Reinstall the ODD Bay
screw to secure the ODD Assebmly.
Advertisement
