Sound Adjustment; Select Mode - Profile LONTANO Manual

7

SOUND ADJUSTMENT

8

SELECT MODE

9
INTERFERENCE
If the chime sounds for no reason, a nearby device may be operating on the same frequency.
Remove the programme as described in point ...
Re-insert the batteries. After hearing the two-tone chime press the button (and possibly a 2nd but-
ton) to confirm the new code. Do this within one minute and do not use any other wireless devices
for the following 5 minutes.
The bell has a volume knob. Turn left or right to adjust the
volume.
♫
Push "mode" on the back of the bell. You have a choice of
the following:
1. LIGHT AND SOUND
2. ONLY LIGHT
♫ 3. ONLY SOUND
The bell has a ON/OFF button. You can opt to temporarily
switch off the sound, depending on the mode you have
selected.
UK