Installing The Batteries In The Remote Control; Programming The Remote Control; Operating The Remote Control - Daewoo DSC-30W60N User Manual

HDTV
H D T V

Installing the batteries in the remote control

1.
Remove the battery compartment lid from the back of the
remote control by pressing on the lid and sliding it off.
2.
Insert two AAA batteries into the compartment. Match the +
and — on the batteries to the + and — in the compartment.
3.
Replace the battery cover.

Programming the remote control

The HDTV remote control is pre-programmed to operate your Daewoo HDTV.You can also program the
HDTV remote control to operate other components, such as a cable TV box, a DSS, or a VCR.To program
the HDTV remote control, please see "Programming the Remote Control" on page 40.

Operating the remote control

Whenever you use the remote, you must first press the Mode
button on the remote control to select the equipment you wish to
control. For example, to control the HDTV, press the TV Mode
button.The button will light up red.
6
Mode
buttons