Black & Decker AST4XC Manual page 5

KA196/KA196E
To switch the tool on, press the front part I of the on/off
x
switch (1).
To switch the tool off, press the rear part O of the on/off
x
switch.
Hints for optimum use
Always hold the tool with both hands (fig. D).
x
Do not exert too much pressure on the tool.
x
Regularly check the condition of the sanding sheet.
x
Replace when necessary.
Always sand with the grain of the wood.
x
When sanding new layers of paint before applying
x
another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
x
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to a
fine grit for a smooth finish.
Consult your retailer for more information on available
x
accessories.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots in your tool using a
x
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
x
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
x
Connect the brown lead to the live terminal in the new plug.
x
Connect the blue lead to the neutral terminal.
x
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Technical data
Voltage V
AC
Power input W
No-load speed min
Oscillations (no load) min
Sanding base surface mm
Weight kg
AST4XC_EURA5.P7
AST4XC CD380
230 230
135 125
-1 11,000 11,000
-1 22,000 22,000
90 x 187 90 x 187
1.2 1.2
5
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
EC declaration of conformity
AST4XC/CD380/CD400/KA196/KA196E
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, 2002/95/EEC, EN 60745,
EN 55014, EN 61000
L (sound pressure) 78 dB(A), L
pA WA
hand/arm weighted vibration 6.86 m/s
K (sound pressure uncertainty) 3 dB(A),
pA
K (acoustic power uncertainty) 3 dB(A)
WA
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
CD400 KA196
230 230
135 135
11,000 11,000
22,000 22,000
90 x 187 90 x 187
1.2 1.3
16-08-2005, 20:25
ENGLISH
(acoustic power) 89 dB(A),
2
Kevin Hewitt
United Kingdom
1-5-2005
KA196E
230
135
6,500 - 11,000
13,000 - 22,000
90 x 187
1.3
5